Appliancejunk - appliancejunk.com - ApplianceJunk.com
General Information:
Latest News:
E91 error Electrolux IQ EIFLW50LIW washer.(i already replaced boards) :( 27 Aug 2013 | 02:23 pm
Hi, I have April 2013 purchased Electrolux IQ EIFLW50LIW washer. i have relocated to Europe and brought the washer with other stuff with me. I am using appropriate converters for each appliance wi...
Re: LG washer trips GFCI when plugged in... 27 Aug 2013 | 01:16 pm
If the washing machine is tripping the GFCI, I would say that it has the potential to electrocute someone when they touch the washing machine, in my experience if it trips the GFCI it has a major f...
Re: Frigidaire front load. Timer ?????? 27 Aug 2013 | 12:31 pm
Seem and try all of the wires arriving from the control to the velocity instrument panel. You are searing for a little, or a fraying or something that would cause supererogatory voltage. If you ca...
Re: LG washer trips GFCI when plugged in... 27 Aug 2013 | 12:12 pm
If it materialists when you plug in the washing machine, but not when you plug another appliance into the same release, it's a potent sign that there is a wiring short in the automatic washer. That...
Maytag Gemini MGT8885XS01 will only preheat 27 Aug 2013 | 11:44 am
I can set oven temp in lower oven to 350f and start preheat. Unit will preheat to 350 but once burner has shut off from preheat it will not come back on once oven temp drops. If I hit cancel and pr...
Re: 240V at N & L1? 27 Aug 2013 | 12:51 am
Hi, Lack of neutral should cause 240V at l1 to N if l1 to N is an open circuit and n to L2 is a very high rersistance. L2 to n should then read 0V because of no current drawn.
Re: Maytag 4000 Series exploded 26 Aug 2013 | 08:25 pm
Call Maytag customer service. They've been providing the tubs, free of charge, for machines up to five years old.
Re: 1950's Hotpoint Fridge 26 Aug 2013 | 08:04 pm
Yeah I would say it has been around for half a century. It might need a shot. Gonna take R-12 fer sure. No r134a.
Re: Maytag 4000 Series exploded 26 Aug 2013 | 07:42 pm
I'm reading that this is apparently a very common problem with these machines - it's definitely the bearing. See this video and the comments:
Maytag 4000 Series exploded 26 Aug 2013 | 06:59 pm
Well, it didn't explode, but it definitely sounded like it. The past few weeks, our washer (Maytag MHWE400WW01) has been making a clanking noise during the spin cycle, like there was a marble or so.....
