Asaclean - asaclean.com - Asaclean Purging Compound
General Information:
Latest News:
Purge Compound instantly removes large black carbonized deposits from scew, barrel and die head 3 Jul 2013 | 11:58 pm
“At Petco Sackner we extrude HDPE and PP resin filler rods and up-jacketed cables for the fiber optic industry. Our crosshead, die and tip configuration have very tight spacing tolerances, therefore w...
Plastics Scrap Rate Reduction Project Yields Big Savings 28 Jun 2013 | 06:00 pm
A large automotive molder in Coahuila Mexico with Synventive hot runner systems was introduced to Asaclean as a potential alternative to their current purge method. This led to an extensive cost savi...
Purging Compound Information Sheet 21 Jun 2013 | 06:18 pm
There are usually lots of people doing the task of purging out the injection molding machines or extruders on a regular basis. What do you use to purge your plastics processing equipment? While that...
Plug Your Vents 14 Jun 2013 | 09:39 pm
During a visit to a well known compounder in Southern California, we sampled Asaclean EX grade on a 40mm, ZSK, twin screw extruder. The extruder was producing a Nylon 6/6 with conductive carbon black....
Asaclean EX Grade Works Wonders for Screw-pulls! 8 Jun 2013 | 01:47 am
A sheet extrusion company called us looking for a solution to reduce their machine downtime due to lengthy screw-pulls. A complete machine tear-down was taking them between 6-8 hours and they were d...
Sun Plastech Expands Its Headquarters 6 Jun 2013 | 08:38 pm
Sun Plastech Inc. (Parsippany, NJ), manufacturer of the leading purging compound, ASACLEAN, is expanding its headquarters, moving to a larger office space. The company will inaugurate the new office o...
Color Changed on Plastics Blow Molding Machines with Accumulator Heads 1 Jun 2013 | 02:30 am
Do you struggle changing colors or resins through your accumulator heads? Purging blow molding machines with accumulator heads can be a real nightmare. A current Asaclean customer who had been success...
Plastics Pipe Extruder Saves Money on Reduced Machine Downtime 24 May 2013 | 08:56 pm
I was contacted by a pipe extrusion company in the Southwest. They were pulling screws on their extruders in order to clean them. The total down time per screw-pull was 12 hours from start to finish...
Random plastics short shots driving you crazy? 17 May 2013 | 09:50 pm
Ever have a job running well and then have your quality department come to you and say they have to place your last hour’s worth of production on hold for short shots? If you’re a molder, chances are ...
Hot Runner Purge Compound Performs Under Pressure 10 May 2013 | 09:59 pm
Asaclean Purge Compounds at Sun Plastech Inc, recently worked on a purge project with a Tier One automotive injection molder in Michigan. The goal of the project was to help them achieve a lower Cost ...
