Bearingboys - bearingboys.co.uk - Bearingboys
General Information:
Latest News:
Three bearing types 31 Jan 2013 | 03:06 pm
The type most common bearings, in terms of construction, used by industry are ball bearings, roller bearings and needle bearings. These types of bearings are used in many diverse applications from the...
Cheap replacement castors 28 Jan 2013 | 03:06 pm
One of the most underrated parts on any machine is the wheels or the feet which the machine is mounted upon. And if the machine is expected to be portable it’s these wheels or feet which will take the...
The important role played by ceramic bearings 27 Jan 2013 | 02:49 pm
There are many applications which use standard bearings as a method of rotation. However over the last few years there has been significant improvement in the methods used to manufacture bearings, whi...
How to heat bearings to enable installation 26 Jan 2013 | 02:49 pm
Some bearings will have to be heated by an appropriate method so that they can be installed on a shaft. This normally applies to any bearing which is over four inches in diameter but it can also apply...
Bearing temperature problems 23 Jan 2013 | 02:10 pm
It’s common for a bearing to increase in temperature during operation. The friction caused by the rolling elements coming into contact with the raceways is enough, no matter what lubricant is used, to...
Bearing maintenance 21 Jan 2013 | 02:10 pm
If you have a maintenance regime which you follow on a daily basis at your industrial site you’ll likely have to make sure that it is followed to the letter so that the machines remain in a good worki...
Bearing components 20 Jan 2013 | 02:47 pm
Bearings are used in many domestic, commercial and industrial applications. From their use in the hubs of cars to their use in your washing machine, if it wasn’t for bearings rotating devices simply w...
Three important replacement bearing tips 19 Jan 2013 | 03:34 pm
Replacing bearings is a common part of an engineer’s daily role. But there are a few things to look out for and a few dos and don’ts which must be adhered to if you want to give your replacement beari...
Safety workwear 17 Jan 2013 | 03:02 pm
Workers in industry have to wear a range of protective clothing and accessories to prevent them from coming to harm when they are doing their day-to-day jobs. Some of these different types of equipmen...
Before replacing V belts you might want to check… 15 Jan 2013 | 03:01 pm
If you are going to install new V belts on a drive there are a few things which must first be taken into consideration so that the installation ios carried out correctly. Use the same belts If you are...
