Forum Post: Re: No of Mode Shapes for Modal Analysis 27 Aug 2013 | 10:55 am

Try to do: Load ->Dynamic Analysis -> Maximum number of modes (enter mode shapes number you need)

Member: Daniel Simko 27 Aug 2013 | 10:50 am

Forum Post: Re: Design of STAR angles by STAAD 27 Aug 2013 | 10:46 am

Hello, Star angle section have been implemented in Select Series 4 and you can design them  for axial force with IS 800-2007 code only . Your model has the code IS 800-1984 , and hence is unable to d...

Member: nor 27 Aug 2013 | 10:28 am

Forum Post: Re: Transportation Analysis In Staad 27 Aug 2013 | 10:14 am

This facility is not available in Staad.Pro . However ,  you may consider using the Staad.OffShore module where you can generate the transportation load. The Offshore module will generate the subseque...

Forum Post: Re: Problem when analysis 27 Aug 2013 | 10:11 am

The error message “No loading defined for UBC load” states (in most cases) that you need to define seismic weight to the definition -when the seismic weight is not defined, the program fails to calc...

Forum Post: Re: Hammer: Surge Tank Initial Level 27 Aug 2013 | 10:03 am

Attached is a sample I am working on where this issue is causing me grief. The plot shows the surge chamber level, the surge chamber is set as a junction. One would expect once full flow is establis...

Member: 454 27 Aug 2013 | 10:02 am

Member: HoLYGabriel 27 Aug 2013 | 09:50 am

Forum Post: Re: MICROSTATION SS3 27 Aug 2013 | 09:36 am

If you have MicroStation V8i SS3 you should be able to import your LandXML file. First option from drop down menu File->Import->TerrainModel LandXML Second, from Tasks menu -> Terrain Model field ->...