Blogspot - twotitans.blogspot.com - Two Titans
General Information:
Latest News:
Project: Replace Space Hulk Terminators 14 Aug 2012 | 06:19 am
Recently my kids have asked to start playing Space Hulk. I'm not to keen on using the limited edition Terminators in the kit so I decided to swap them out. This should be a rather quick project to ge...
2010 Epic Fail/2011 Epic Finish 6 Jan 2011 | 09:32 am
After reading a bunch of hobby blogs and seeing how much everyone has done in the past year and upon reflection of my own effort I realize that 2010 was an EPIC HOBBY FAIL. I have a half finished Tita...
Prime Time 4 Aug 2010 | 11:31 pm
Not to much to update, work has been keeping me down, but if its was not called work it would be called play. Anyway, I've gone ahead and primed the major parts of the titan and added most of the sma...
Getting the colors right 27 Jul 2010 | 01:49 pm
Taking a small break from the building to figure out the painting. I used one of my "extra" parts FW sent for a test run. Pretty happy with it so far. IMG_0342 - Black Auto Primer IMG_0343 - Armypa...
Get up - Stand up 26 Jul 2010 | 09:18 am
A quick look, standing on his own two feet. The legs are NOT glued in place, held in with the brass rods I'll get a shot of the legs pulled out later, I still have some pinning to do for some extra s...
She's got legs 25 Jul 2010 | 11:48 am
Ok, so I got to the legs. It did offer me a slight challenge because of the elevated foot. Keeping the hip move level so the whole model does not look like its tipping over was always on my mind and I...
Magnet time 25 Jul 2010 | 10:03 am
Before I get to the legs I went ahead and used magnets on the hip and upper torso. I cut the hip's torso mounting "disk", after cutting it scorch it with a hobby knife to give the green stuff some ext...
Lesson Learned 23 Jul 2010 | 02:43 pm
Never let it be said that I don't learn from past mistakes. On my last Titan build I had a hard time with the toe pistons being to short on a couple of toe's. With this in mind I headed down to the l...
These shoe's were made for walking 21 Jul 2010 | 08:01 am
Well a little late is better then never. So in dealing with the position of the feet I've settled on the foot location. To ensure no slipping I decided to screw the foot base to the ahmm base. This wi...
What ya doin with your feet son? 6 Jul 2010 | 08:35 am
Ok, back to my Warhound. I've got the base secure to the wooden base. Even with the resin epoxy I still had to use two wood screws on the corners to force it to lay flat because of a bend. Now I've b...
