Mustangv8 - mustangv8.com - V8 Ford Mustang forums
General Information:
Latest News:
99 mustang windows 22 Aug 2013 | 08:04 am
1999 mustang rear windows work fine up and down but front windows stopped working at the same time is there a fuse I have missed ?
Re: Electrical question 19 Aug 2013 | 04:31 pm
It could be the headlight switch - there's a little wiper in it that contacts the spring that serves as the resistor for the dimmer. The wiper can bend and short to the switch.
Re: Electrical question 18 Aug 2013 | 07:06 pm
I did place another fuse in the box with the head light switch pulled half way out turning on the parking lights, did not blow the fuse. I was under the dash watching the fuse and as soon as I started...
Re: Electrical question 18 Aug 2013 | 05:00 pm
Hopefully you have schematics and routing diagrams. I'd start with a visual inspection for bare wires or things touching that should not be. First look under the dash. If nothing is obvious, try l....
Re: 66' power steering slave cylinder bracket 18 Aug 2013 | 04:51 pm
You will probably get the best answer if you post your question here: http://forums.vintage-mustang.com/concours-forum/
66' power steering slave cylinder bracket 17 Aug 2013 | 07:17 pm
Help needed. The PS cylinder bracket I removed from the 66' I am restoring was painted this gold color (see pic). I have read in some places the bracket should be the natural cast iron, while elsewhe...
Electrical question 17 Aug 2013 | 08:07 am
My 67' convert. driving along my dash lights stopped working. Dome lights, markers and head lights work fine. Put a new fuse in and as soon as I turn head light switch pops the fuse. Any ideas out the...
Re: 65 mustang master cylinder 16 Aug 2013 | 04:09 am
Hard to say without a photo. Can you post a couple of photos of what you have?
Re: factory timing setting on 1966 289 2v 15 Aug 2013 | 05:35 pm
Factory timing spec was 6 deg BTDC at idle (this is with the vacuum advance disabled, if you have that unit). You can advance this incrementally to see whether it helps.
factory timing setting on 1966 289 2v 15 Aug 2013 | 03:23 am
Hey guys I need some info. I have completely original 66 coupe my friends dad bought new I have upgraded to msd ignition instead of points and car drives ok but has no low end I'm afraid I have throw...
