Renovateforum - renovateforum.com.au
General Information:
Latest News:
Shed formwork advise -- 27 Aug 2013 | 07:10 pm
Hi All Just getting ready to complete my in shed slab of my already in place 6x6 meter shed. I am going to be doing half a side at a time. My question is for any ideas on the wall side to do the fo...
Replacing verandah posts 27 Aug 2013 | 03:38 am
I have Oregon veranda posts that are stating to rot at the bases. They sit on the joist at the end of the deck, skew nailed down. So water has pooled at the base, in the hollow where the decking is cu...
double cavity slider 27 Aug 2013 | 01:10 am
Hi guys, I have installed single cavity sliders into a new frame but is there anything different I need to know about how to install a double cavity sliders? Are they just two singles put together? ...
Removing old paint form Cornices? 26 Aug 2013 | 07:49 pm
Hi all, What would be the best method of removing old paint form my ceiling cornices with damaging them? Appreciate the advice. Zaqzaq Attached Images ceiling cornice_l.jpg (23.5 KB)
Removing an old ceiling without damaging the cornices. Advice Please? 26 Aug 2013 | 07:43 pm
Hi All, I have an old ceiling that needs to be replaced. My only concern is I do not want to damage the cornices which are in good shape. My plan of attack is to use a radial saw to cut as close to ...
Budget Airless Sprayer - any good? 26 Aug 2013 | 05:49 pm
I'm trying to find a review for this Paint Spray Gun Ozito 650W Airless W 7.6m Hose - Bunnings Warehouse but can't find anything useful. Has anymore has any experience with this? I'm doing fence, th...
Turning Laundry into second bathroom 26 Aug 2013 | 04:10 pm
Hi Everyone, First post here and bit of a DIY noob. I have successfully converted my 6x4 shed into a garden studio which my sister quickly snapped up and is now living in. I learnt soo much doing th...
H4 post how deep do i need to go 26 Aug 2013 | 02:47 pm
Hi all great forum here...first real post after having some trouble setting this up so just want to see it works this time around. i need to strengthen up a gate post to hold up the gate and also stre...
cost to change tap and any plumber recomend 26 Aug 2013 | 02:45 pm
I want to change the sink mixer in the kitchen take old out and replace with a newone already bought tap cost and any recommended plumbers Carnegie area melbourne
Removing concrete splatter from ute tray 26 Aug 2013 | 10:17 am
Does anyone know of a product which will remove concrete off the side of an aluminium tray? As I usually get a load of builders mix on the back of the ute and shovel it straight off into the mixer I ...
